58
8. Fill the crankcase with the recommended grade oil;
approximately:
1.5 l l l l l (1.6 US qt, 1.3 Imp qt)
9. Install the oil filler cap/dipstick.
10. Start the engine and let it idle for 3 – 5 minutes.
11. 2 – 3 minutes after stopping the engine, check
that the oil level is at the upper level mark on the
dipstick with the motorcycle upright on firm, level
ground. Make sure there are no oil leaks.
Spark Plug
(Refer to the Safety Precautions on page 49.)
Recommended plugs:
Standard: CR8EH – 9S (NGK)
For extended high speed riding:
CR9EH – 9S (NGK)
NOTICE
Never use a spark plug with an improper heat range.
Severe engine damage could result.
1. Disconnect the spark plug cap (1) from the spark plug.
2. Clean any dirt from around the spark plug base.
Remove the spark plug using the spark plug wrench
furnished in the tool kit.
(1)
Owner´s Manual
(1) Spark plug cap