Wan Usb - Draytek Vigor2760 Series User Manual

Apply
Clear
Cancel
3. After finished the settings above, click Apply to save the settings.
4 . 1 . 1 . 9 W A N U S B
4 . 1 . 1 . 9 W A N U S B
If your router connects to a 3G modem and you want to access Internet via 3G modem, choose
3G as connection type and type the required information in this web page.
Each item will be explained as follows:
Item
Edit
Refresh
Backup
Name
Default Route
for the channel according to the information that your ISP
provides.
The following options appear according to the QoS type you
select.
The default setting is "0".
Peak Cell Rate –
Cell Delay Variation –
Minimum Cell Rate – The default setting is "0"..
Sustainable Cell Rate – The value of Sustainable Cell Rate
(SCR) must be smaller than PCR(Peak Cell Rate).
Maximum Burst Size – The default setting is "0".
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
Description
Edit the selected WAN profile.
To edit the profile, simply check the profile box you want to
edit and then click this button.
Click it to refresh the web page.
Display if current backup WAN interface is enabled or not.
Display the profile name for USB interface.
Display if the default route is applied to such WAN profile
or not.
Enable – The default route is applied to the WAN profile.
Disable – The default route is not applied to the WAN
46
The default setting is "0".
Vigor2760 Series User's Guide