Draytek Vigor2760 Series User Manual page 53

VLAN Encapsulation
Ethernet Port
Members
Wireless SSID
Members
ATM QoS
Vigor2760 Series User's Guide
Encapsulation - Choose a proper type for this channel. The
types will be different according to the protocol setting that
you choose.
Enable the function of VLAN with tag. The router will add
specific VLAN number to all packets while sending them
out. Please type the tag value and specify the priority for the
packets sending by the router.
VLAN ID –Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority (802.11) - Type the packet priority number for such
VLAN. The range is from 0 to 7.
Note: In default, there is no item displayed here.
All the Ethernet Port Members (from port1 to port4) are
dedicated to the default LAN profile. Before configuring the
settings for new LAN profiles or Bridge profiles,
please reconfigure the default LAN profile (enter Ethernet
tab located in the Network >> LAN page) to release some
port members first. Otherwise, you may not be able to
complete the profile configurations for the new interface.
Use the ">" button to move the selected item listed in
Available Items onto Selected Items for choosing the
suitable port for the new profile.
Available Items – Display the available port member.
Selected Items – Display the port member selected for such
group.
Note that the LAN Port (port1 to port4) selected here can not
be used in other profiles.
Note: In default, there is no item displayed here.
All the Wireless SSID Members (SSID1 – SSID4 and
WDS1 – WDS4) are dedicated to the default LAN profile.
Before configuring the settings for new LAN profiles or
Bridge profiles, please reconfigure the default LAN profile
(enter Ethernet tab located in the Network >>
LAN page) to release some port members first. Otherwise,
you may not be able to complete the profile configurations
for the new interface.
Then, use the ">" button to move the selected item listed in
Available Items onto Selected Items for choosing the
suitable wireless SSID members to be used in the new
profile.
Available Items – Display the available wireless SSID
member.
Selected Items – Display the wireless SSID member
selected for such profile.
Note that the wireless SSIDs selected here can not be used in
other profiles.
Such configuration is applied to upstream packets. Such
information will be provided by ISP. Please contact with
your ISP for detailed information. Select a proper QoS type
45