Draytek Vigor2760 Series User Manual page 86

Default Key
Key
Confirm Key
Pre-Shared Key
(PSK)
Confirm Pre-Shared
Key (PSK)
Apply
Clear
Cancel
3. After finished the settings above, click Apply to save the settings.
4. Now, you have configured the SSID2 successfully.
802.1x authentication.
Mixed (WPA/WPA2)-PSK - Accepts WPA and WPA2
clients simultaneously and the encryption key should be
entered in PSK.
Such function is available when WEP is selected as Security
Setting.
Choose one of the key selections as the default key. All
wireless devices must support the same WEP encryption bit
size and have the same key.
Such function is available when WEP is selected as Security
Setting.
The format of WEP Key is restricted to 5 ASCII characters
or 10 hexadecimal values in 64-bit encryption level, or
restricted to 13 ASCII characters or 26 hexadecimal values
in 128-bit encryption level. The allowed content is the ASCII
characters from 33(!) to 126(~) except '#' and ',' .
Such function is available when WEP is selected as Security
Setting.
Type the encryption key again for confirmation.
Either 8~63 ASCII characters, such as 012345678..(or 64
Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
Type the PSK again for confirmation.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
78 Vigor2760 Series User's Guide