Activation - Draytek Vigor2760 Series User Manual

Apply
Clear
4 . 1 1 . 1 0 A c t i v a t i o
4 . 1 1 . 1 0 A c t i v a t i o
There are two ways to activate WCF on vigor router, using Activation Wizard, or via System
Maintenance>>Activation.
After you have finished the setting profiles for WCF (refer to Web Content Filter Profile), it
is the time to activate the mechanism for your computer.
Click System Maintenance>>Activation to open the following page for accessing
http://myvigor.draytek.com.
Available parameters are listed below:
Item
Activate
Refresh
Name
Service Provider
Start Date
Expire Date
Authentication Message
Status
Note: Refer to section 3.1 to get detailed information.
Click it to process the firmware upgrade.
Cancel the file selection.
n
n
Description
Choose the license list you want and check the front box of
the list. Then, click Activate to access into myvigor website
for activating the formal or trial version of the WCF
mechanism.
Click it to refresh the web page.
Display the name of the web content filter mechanism.
Display the service provider who offers the WCF
mechanism.
Display the starting date for the valid time of the license.
Display the ending date for the valid time of the license.
Display the brief description of the license.
Display current status (Activated or Not Activated) of the
WCF license.
206 Vigor2760 Series User's Guide