Draytek Vigor2760 Series User Manual page 90

Available parameters are listed below:
Item
Name
Enable
Filter Type
MAC List
Apply
Clear
Cancel
3. After finished the settings above, click Apply to save the settings.
Description
Display the name of the Access Control profile. Such name
is assigned by the router in default.
Check the box to enable the Access Control profile.
Allow List - The clients displayed on MAC List are allowed
to pass through the router.
Deny List – The clients displayed on MAC List are NOT
allowed to pass through the router.
Type the MAC address of the wireless client. Click the +
button to display the entry box to fill in the MAC address.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
82 Vigor2760 Series User's Guide