Push To Open Outward - Gatekeeper YG-5602 Owner's Manual

Push to Open Outward

Push to Open Outward is the best configuration for exit gates.
Do not use Push to Open Outward with entry gates because of the risk of
the gate striking a person or a vehicle waiting inside of the gate's sweep.
Opening A cm
Angle
90 8.5
110 12.5
The installation should meet the specifications shown in the figure. Failure to do so may
cause opening and closing problems.
This configuration pushes the gate outward, away from
your property, to open.
Mount the actuators on the included brackets according to
the figure below. The gate mounts on one face of the
mounting post, and the opener mounts on the face 90
degrees from it. Initially mount the actuators on the gate
so that the gate is open. Mount the arm so that the key
slot is on top of the actuator. Then lock the actuator with
the key.
A inch B cm B inch
3.34 13 5.12
4.92 11 4.33
page 17
C cm C inch D cm
97 38.12 6.5
85.9 33.82 6.5
D inch
2.56
2.56