Figure 2.8 Installing The Optical Disk Drive And Fdd - Advantech ACP-2010MB User Manual

2u-high rackmount chassis for atx / microatx motherboard

Hide thumbs Also See for ACP-2010MB:

Table of Contents

To install the optical disk drive and 3.5" FDD, undo the screws on the 5.25" disk

drive bracket.

Undo the screws on each side of the 5.25" disk drive bracket to remove the front

covers.

Slide the optical disk drive and the FDD into the bracket and fasten it on both

sides with the eight screws provided (see Figure 2.9). Return the 5.25" disk

drive bracket with the disk drives in the original position and reattach it inside the

chassis with the original screws.

Connect the suitable IDE or SATA cables from the motherboard to the 3.5" inter-

nal HDD, the optical disk drive, or FDD. Then, plug the power connector into

each disk drive.

ACP-2010MB User Manual

Figure 2.8 Installing the optical disk drive and FDD

Table of Contents