Internal Connectors; Internal Connectors Page; Floppy Disk Drive Connector (34-1 Pin Floppy1); Power Led Connector (3-Pin Pled1) - Advantech mATX i915GV2-IGM Series User Manual

1.7.2

Internal connectors

1.

Floppy disk drive connector (34-1 pin FLOPPY1)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using a FDD cable with a covered Pin 5.
2.

Power LED connector (3-pin PLED1)

This 3-pin connector is for the system power LED. Connect the 3-pin power
LED cable from the system chassis to this connector. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
i915GV2-IGM 1-23