Table of Contents
Advertisement
Signamax™ 065-1140 series and 065-1150 series
10BaseT to 10BaseFL Converter
4
M
OUNTING
This converter can be placed in any location that will make
its installation convenient. If you place the converter on a
work surface or on top of existing networking equipment
you may add the four rubber feet included in the packaging.
This converter can also be mounted on a vertical surface.
Just use the template opposite and mark the position of the
holes. Simply use two screws and mount the converter in
place.
Please exercise caution when using power tools. Also take
care to install this unit away from damp or wet locations, or
in close proximity to very hot surfaces. This will have a
detrimental effect on the converter and cables. An ideal
location is in a lightly cooled environment, such as a typical
equipment room.
Mounting
12
Advertisement
Table of Contents
