Advertisement
Operation
For First Use, the camera will undergo self-calibration within several seconds. IntelliCorder 0 has
different languages, time/date format and flicker options available. Select your desired setting first
before use (see page 12).
To save battery power, the IntelliCorder 0 will enter into sleep mode at 5 seconds when not in use or
no motion is detected.
SD Card (not included)
For increased recording time, data (Video files) can be stored onto standard SD memory cards. Data
from the IntelliCorder 0's internal memory can also be downloaded to an SD card. The IntelliCorder 0
accepts SD memory cards up to 4GB.
SD Card Insertion/Removal
1. Insert SD card with the logo facing outward toward the LCD screen. Press the SD memory card
inward until it clicks into position.
2. To remove the SD memory card, press on it to release. It will click and eject out.
Record / Playback Time
Use one of the following SD card sizes in the chart below. The resolution setting determines the
recording length.
Resolution
Fine
SP (Standard Play)
LP (Long Play)*
* LP playback may contain more picture noise
Motion-Activated RECORD
The IntelliCorder 0 can record high-resolution video with sound of visitors/intruders at your front or
back door, even when you are not home.
Before you begin
* Check the Battery Indicator
* If using an SD memory card, ensure it is properly installed.
128MB
512MB
8 min
32 min
13 min
52 min
21 min
84 min
1GB
4GB
64 min
256 min
104 min
416 min
168 min
672 min
9
Advertisement
