Advertisement
Note:
* We recommend backing up important data
* IntelliCorder supports up to 4 GB SD memory card.
* Video data may be damaged in the following cases:
- If you remove the SD memory card before you turn off power
- If you remove batteries while reading or recording data to the SD memory card.
- If the SD memory card is placed near magnetic or static electricity fields
* Do not bend, drop or apply strong shock to a SD card.
* Do not disassemble or modify a SD card.
* Do not let the SD card get wet.
* Do not use or keep a SD card in locations that are:
- Extremely hot
- Under direct sunlight
- Very humid or subject to corrosive gases
* When you carry or store a SD/MMC, put it in its case.
* A SD card formatted by the Windows OS or Macintosh computer does not have a guaranteed
compatibility with this IntelliCorder 0.
Download Video
To download video images directly from a SD memory to your PC, a Multimedia or SD card reader
compatible with your computer is required.
Typical video data file name
Root: folder <DCIM> <100 CODER> CLIP0001~2,3,.... : As displayed on your PC screen
TROUBLE SHOOTING
If you are having trouble in operating this product, please consult the guide as below:
SYMPTOM
No picture in LCD
monitor
LCD displays
"SENSOR ERROR"
Audio problems
The power goes off
The AUTO RECORD
function does not
work
The battery
REMEDIES
* Use 3pcs new or fully charged alkaline batteries
* Firmly connect all needed cables
Ensure the plug of the ribbon cable is properly attached into the
terminal (see page 8)
* Make sure camera and monitor are switched ON.
* Make sure camera is not covered
Ensure the volume is turned up sufficiently on the monitor
The Batteries are dead or nearly dead
Install 3pcs new or fully charged alkaline batteries
* There is no AUTO RECORD in the
PLAY or menu settings.
* You have used the batteries in an extremely hot or cold environment
17
Advertisement
