Advertisement
Things You Should Know
FCC Warning
Any unauthorized changes or modifications to the equipment would void the users authority to
operate. This IntelliCorder 0 complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
1. The IntelliCorder 0 may not cause harmful interference.
2. The IntelliCorder 0 may accept any interference received.
Important Safeguards
1. Cleaning – Turn off this video unit before cleaning. Do not use strong or abrasive detergents. Use
a dry cloth to clean the camera body when dirty. In case the dirt is hard to remove, use a damp
(not wet) cloth for cleaning.
2. Water and Moisture – Do not use any component of this system in an exposed outdoor area,
except the outer part of front sensor. Do not operate this system in the presence of explosive or
flammable fumes.
Precautions
1. Do not attempt to disassemble the camera. There are no user-serviceable parts inside
2. Handle the IntelliCorder 0 with care – Avoid striking or shaking. Improper use or storage could
damage the IntelliCorder 0. Modifying or tampering with the device or its internal components can
cause a malfunction and void the IntelliCorder 0's warranty. If you feel the IntelliCorder 0 may not
be performing correctly, contact customer service for assistance.
3. Motion Detection – The PIR motion sensor will NOT detect motion through glass storm doors,
screen doors or metal gates.
4. Camera faceplate care – Do not clean the lens with strong or abrasive detergents. Use lens tissue
or a cotton tipped applicator and ethanol alcohol.
5. Light Source – The Camera viewing area must be illuminated with a suitable light source during
evening and nighttime hours.
6. Door Mounting – The product should be mounted to a door, only as recommended by the
instructions. Contact customer service for any questions.
7. Stand-by MODE – When not using your IntelliCorder 0, press and hold power button to go to
stand-by mode.
8. Do not touch the LCD screen with a sharp-pointed object.
9. If your IntelliCorder 0 is used in a cold environment, a residual image may appear on the LCD
screen. This is not a malfunction.
3
Advertisement
