Advertisement
4. Use ⊳
to move to Copy File to SD. Press OK to enter
5. Use
to select Cancel or OK
6. Press OK to start copying. "Transferring" sentence appears and then go to the latest file at
thumbnail screen
7. Press MENU during setting to cancel the selection and go back to the last menu
Note:
- Files copied from the internal memory will be stored in a new folder \DCIM\xxxFLASH\.xxx
- The original files in the internal memory will not be erased. They must be erased manually.
Default Setup
Should it become necessary, you have the option of setting the IntelliCorder 0 back to the original
factory default settings.
1. Press MENU to enter Menu mode
2. Use ⊳
to move to Setup
3. Press OK to enter the setting mode
4. Use ⊳
to move to Default Setup. Press OK to enter
5. Use
to select "Cancel" or "OK". Press OK to confirm the selected command
6. If "OK" is selected, the default setup will be restored and go to normal mode; Select "Cancel" to
go back to previous menu
7. Press MENU during setting to cancel the selection and go back to the last menu
Firmware Version
Occasionally, software updates/improvements may become available. The IntelliCorder 0 has the
ability to load new software. Check the website periodically to find out if new software versions are
available. Instructions to download from the website and upload to the IntelliCorder 0 can also be
found on the website site. You can also contact Customer Service for any question.
1. Press MENU to enter Menu mode
2. Use ⊳
to move to Setup
3. Press OK to enter the setting mode
4. Use ⊳
to move to Version. Press OK to enter
5. Press OK or MENU to go back to previous menu
Use "SD Memory Card"
You can record and play back videos on the SD memory card (purchase separately). You can also
exchange video data with other equipment such as a personal computer etc., using the Memory Card
Reader/Writer or a PC card adaptor (not supplied).
RESTORE
DEFAULT
SURE?
ARE YOU
Cancel
Ok
Version
v601010
16
Advertisement
