Download
Share
Print this page
  1. Manuals
  2. Brands
  3. IntelliCorder Manuals
  4. Intercom System
  5. 1500
  6. Operating instructions manual

IntelliCorder 1500 Operating Instructions Manual

Camera system
Hide thumbs

Advertisement

Quick Links

Download this manual
IntelliCorder 0 Camera System
Model No.1500
Operation Instructions
1

Advertisement

loading

Summary of Contents for IntelliCorder 1500

  • Page 1 IntelliCorder 0 Camera System Model No.1500 Operation Instructions...
  • Page 2 Congratulations With the IntelliCorder 0, you can monitor the entrance of any home or business and safely answer your door before opening. The internal Digital Video Recorder (DVR) can capture the video/audio of any visitor even when you are not present. The IntelliCorder 0 is a high-quality, battery-operated monitoring device.
  • Page 3 7. Stand-by MODE – When not using your IntelliCorder 0, press and hold power button to go to stand-by mode. 8. Do not touch the LCD screen with a sharp-pointed object. 9. If your IntelliCorder 0 is used in a cold environment, a residual image may appear on the LCD screen. This is not a malfunction.
  • Page 4 Features Monitor and Sensor Front 1. LCD Screen – 1.5” LTPS LCD 2. Speaker – play back the audio sound of recorded file in PLAY mode 3. SD Card Insert Slot 4. Battery Cover 5. Microphone 6. Motion-activated Sensor – detects motion up to 6.5 feet (2 meters) away from a horizontal angle of up to 125 degrees (Motion cannot be detected through glass storm doors, screen doors or metal gates).
  • Page 5 Operation Indicators 1. New Message Light Indicator (Green) 2. Low Battery Light Indicator (Red) Preparation Install Battery 1. Slide downward and pull open the battery cover 2. Install 3 x new alkaline or rechargeable AAA Batteries (not included) into the battery compartment, observing proper +/- polarities as indicated.
  • Page 6 * Do not drop or jar Batteries * While not in use, remove Batteries from the IntelliCorder 0, and store in a cool, dark, dry place. CLOCK Battery Installation The IntelliCorder 0’s internal clock operates on a CR2032 lithium flat cell battery (included). To replace battery when expired: 1.
  • Page 7 At this height, the PIR sensor detects motion up to 6.5 feet (2 meters) away, with a viewing angle up to 80 degrees. To help avoid false activation, mount your camera: * Away from direct sunlight * Away from heat sources, such as space heaters, radiators, and exposed light bulbs * Away from strong drafts, like those caused by central heating vents 1.
  • Page 8 9. To activate clock battery, pull the insulator tab from the backside of Monitor. 10. Position the slot located at the top edge of the IntelliCorder 0 onto the top tab of the Mounting Bracket. Next, fit the slot located at the bottom edge of the IntelliCorder 0 onto the lower tab of the mounting bracket.
  • Page 9 Select your desired setting first before use (see page 12). To save battery power, the IntelliCorder 0 will enter into sleep mode at 5 seconds when not in use or no motion is detected.
  • Page 10 1. When motion is detected, the IntelliCorder 0 begins recording shortly after the PIR detects motion. It continues recording until motion has ceased for 5 seconds. 2. The IntelliCorder 0 is equipped with internal memory for immediate recording storage. Video files are stored as MOTION JPEG format.
  • Page 11 * Press PLAY to exit from Play mode to Live mode Notes: * The IntelliCorder saves video files with date and time information in Thumbnail mode * New message light will turn off when the video is played * Recordings will stop when starting the Play Back Mode (Video)
  • Page 12 5. Use ⊳ to select “Cancel” or “OK. Press OK to confirm the selected command and go back to the previous menu. Note: You can press the MENU button anytime during setting to cancel the selection and go back to the previous menu.
  • Page 13 3. Press OK to select an option. 4. When finished, press MENU button to exit from Menu mode to Live mode. Note: The menu mode will cancel if a selection is not made within 30 seconds. The IntelliCorder 0 will enter into stand-by mode.
  • Page 14 Date/Time Flicker Go to Reset All Settings Menu Go to Firmware Version Info. Menu Movie Quality Movie Quality Fine You can select the Movie quality mode in video recording. The default setting is Standard Play. Fine (320x240 @ 30fps) Standard Play (320x240 @ 20fps) Long Play (320x240 @ 13fps) 1.
  • Page 15 The Copy Files function can be used to copy all video files at once from internal memory to SD card. Note: IntelliCorder 0 will automatically detect an SD memory card after insertion. Record, Play and other file management tasks will be routed from internal memory to SD memory card.
  • Page 16 RESTORE DEFAULT SURE? ARE YOU Cancel Should it become necessary, you have the option of setting the IntelliCorder 0 back to the original factory default settings. 1. Press MENU to enter Menu mode 2. Use ⊳ to move to Setup 3.

  • Page 17: Troubleshooting

    Note: * We recommend backing up important data * IntelliCorder supports up to 4 GB SD memory card. * Video data may be damaged in the following cases: - If you remove the SD memory card before you turn off power - If you remove batteries while reading or recording data to the SD memory card.
  • Page 18 10% ~ 85 % Weight: IntelliCorder 0 147g (excluding batteries) Dimensions: IntelliCorder 0 - Monitor 108 x 65 x 24mm (excluding Mounting Bracket) IntelliCorder 0 - Sensor 58 x 35 x 13mm (excluding Supporter) Weight and dimensions as shown above are approximation only.