Advertisement
Date/Time
Flicker
Go to Reset All Settings Menu
Go to Firmware Version Info. Menu
Movie Quality
You can select the Movie quality mode in video recording. The default setting is Standard Play.
Fine (320x240 @ 30fps)
Standard Play (320x240 @ 20fps)
Long Play (320x240 @ 13fps)
1. Set MODE to RECORD or LIVE while the LCD is on.
2. Press MENU to enter Menu mode
3. Use ⊳
to move to Movie Quality
4. Press OK to enter the setting mode
5. Use ⊳
to select your desired Movie Quality
6. Press OK to confirm the selected quality and go back to the last menu
7. Press MENU during setting to cancel the selection and go back to the last menu
Adjust White Balance
White balance adjustment can make subjects look washed out or it can allow more natural color
balance for video recording. Normally, white balance is automatically adjusted. You can obtain
different results by adjusting the white balance manually to fit your actual living environment.
Auto
Sunlight
Cloudy
Fluorescent
Tungsten
1. Press MENU button to enter Menu mode
2. Use ⊳
to move to White Balance (AWB)
3. Press OK to enter the setting mode
4. Use ⊳
to move to your desired effect (Auto, Sunlight, Cloudy, Fluorescent or Tungsten)
5. Press OK to confirm the selected quality and go back to the previous menu.
Note: You can press the MENU button anytime during setting to cancel the selection and go back
to the previous menu.
Movie Quality
Fine
14
Advertisement
