Advertisement
1. When motion is detected, the IntelliCorder 0 begins recording shortly after the PIR detects motion.
It continues recording until motion has ceased for 5 seconds.
2. The IntelliCorder 0 is equipped with internal memory for immediate recording storage. Video files
are stored as MOTION JPEG format. If no SD memory card is detected, files will be stored to
internal memory. For longer recording time, you can use SD memory card up to 4GB. When the
memory is full (either internal or on SD memory card), IntelliCorder 0's auto-deletion function will
erase three oldest files each time.
PIR Sensor activation may not occur when:
* Motion is very slow or very fast.
* Moving object is very small.
* Motion occurs only in 1 corner of viewing area.
Note: The PIR sensor will not detect motion through a glass storm door, screen door or metal gate.
Record Status
Red – Movie recording
Green – live preview
Video Quality
FINE
320x240 @ 30fps
SP
320x240 @ 20fps
LP
320x240 @ 13fps
1:20
Record Elapsed Time /
Remain Time
01/01/2005
Clock Info / Stamp Mode
12:00 AM
Manual RECORD
1. When no motion is detected but you desire to look outdoor environment, press POWER to wake
up camera and LCD screen at LIVE mode.
2. Press OK to manually start recording. Press OK again to stop recording.
PLAY Back Video Files using Monitor
A flashing Green light indicates new files have been recorded. You can monitor the playback picture
on the LCD screen using the IntelliCorder 0's DVR features.
Press POWER to wake up camera and LCD screen at Live mode
1. Press PLAY and Thumbnail file(s) will appear on the screen.
2. Use ⊳
to select the desired file to preview.
3. Press OK to open it.
4. Uses OK to play/pause/replay the video.
After 30 seconds the IntelliCorder 0 will go into sleep mode.
When the video is playing,
* Press ⊳
to skip to previous/next video.
* Press
to increase volume or
When the video is paused/stopped,
* Press ⊳
to skip to previous/next video.
* Press
to go back to thumbnail screen.
to decrease it.
10
Set Clock
The clock time is lost in last power off
Battery Status
Full Power Level
66% Power Level
33% Power Level
Empty
SD/MMC card Status
Present and Valid
Present but Locked (Red in color)
Advertisement
