Advertisement
3. Press OK to enter the setting mode
4. Use ⊳
to move to Date/Time. Press OK to enter
5. Use ⊳
to move to desired item. The selected item is always blinking.
6. Press
to increase the current item's value or
7. After setting, press OK to save changes and go back to last menu.
8. During setting, press MENU to cancel selection and go back to previous menu.
Choose Flicker Option
This setting is for 50Hz/60Hz lighting.
E.g.
US: 60Hz
EU: 50Hz
HK: 50Hz
1. Press MENU to enter Menu mode
2. Use ⊳
to move to Setup
3. Press OK to enter the setting mode
4. Use ⊳
to move to Flicker option. Press OK to enter
5. Use ⊳
to select 50Hz or 60Hz depending on your own country's lighting condition
6. Press OK to proceed the selection and go back to last menu
Note: You can press the MENU button anytime during setting to cancel the selection and go back to
the previous menu.
Menu Screen at Live or Record mode
Using Menu Mode
Press POWER to wake up camera and LCD screen at Live mode
1. Press MENU button for Menu mode. The Menu screen with thumbnail selections will appear.
2. Press ⊳
to highlight the desired item.
3. Press OK to select an option.
4. When finished, press MENU button to exit from Menu mode to Live mode.
Note: The menu mode will cancel if a selection is not made within 30 seconds. The IntelliCorder 0 will
enter into stand-by mode.
Movie Quality
Select Movie Quality
Select White balance
Choose LCD Brightness
Go to Format Menu
Go to Copy All to SD Card
Set up Language
Flicker
50Hz Light
Default Setup
to decrease it.
13
Advertisement
