Advertisement
remaining indicator
does not indicate the
correct time
Recording does not
function
NO SD memory card
SD card cannot be
inserted
LCD displays
Specifications
Battery:
Video Recording Camera: 1/5" type CMOS, Approx. 300,000 pixels
LCD:
File Type:
Operating Temperature:
Operating Humidity:
Weight:
Dimensions:
Weight and dimensions as shown above are approximation only.
Design and specifications are subject to change without prior notice.
Important:
For electrical products sold within the European Community. At the end of the
electrical products useful life it should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice in your country.
for a long time.
* The batteries are completely dead
* The SD formatted incorrectly is inserted.
Format the SD memory card or use another SD card
* Check Battery Indicator
* No SD card or unreadable SD card is inserted
* The SD memory card is broken or the file format is incorrect. Eject the
SD card, check it for damage and insert it again. If the same indicator
appears, use another SD card.
* Insert SD card, label side facing out
* Set the time and date
* Replace with a new CR2032 battery for clock
3pcs 1.5V alkaline batteries
1.5 inch Color LPTS (480 x 240)
Motion JPEG
0°C ~ 50°C (32°F ~ 122°F)
10% ~ 85 %
IntelliCorder 0
IntelliCorder 0 - Monitor
IntelliCorder 0 - Sensor
Replace with new Batteries
147g (excluding batteries)
108 x 65 x 24mm (excluding Mounting Bracket)
58 x 35 x 13mm (excluding Supporter)
18
Advertisement
