Advertisement
* Do not drop or jar Batteries
* While not in use, remove Batteries from the IntelliCorder 0, and store in a cool, dark, dry place.
CLOCK Battery Installation
The IntelliCorder 0's internal clock operates on a CR2032 lithium flat cell battery (included). To
replace battery when expired:
1. Remove the cover on the back of the unit by rotating tabs into unlock position.
2. Install a new CR2032 battery into the clock battery compartment, observing proper +/- polarities
as indicated.
3. Replace the battery cover. Rotate tabs into lock position.
Warning:
* Dispose of old battery promptly and properly. Do not burn or bury.
* Replace battery with CR2032 only. Use of another battery may present a risk of damage to the
IntelliCorder 0.
* Keep away from children. Do not recharge, disassemble or dispose of in fire.
Note:
* Keep battery out of children's reach. Swallowing it may be harmful.
* Battery life is approximately two years.
Installation
Choose a Mounting Location
The IntelliCorder 0 is designed to mount on a smooth, flat door surface from 30mm to 65mm. Select
a door/entrance you wish to monitor. The recommended mounting height is approximately 5-6 feet.
6
Advertisement
