Advertisement
* Press PLAY to exit from Play mode to Live mode
Notes:
* The IntelliCorder saves video files with date and time information in Thumbnail mode
* New message light will turn off when the video is played
* Recordings will stop when starting the Play Back Mode (Video)
* The file order depends on DCF Index: CLIP00001 to CLIP09999
Playback status
Video stop
Video Playing
Video Pause
21/28
Current File / Total File
2005/01/01
Movie Date and Time
12:00:00
Menu Screen at Play mode
Erase This
Go to Erase This
Go to Erase All
Go to Volume Level Menu
Enter Setup Mode
Go back to Thumbnail Mode
Erase This
1. Press PLAY button to enter thumbnail screen
2. Use ⊳
to select the desired file
3. Press MENU button to enter Menu mode
4. Press OK to enter "Erase This"
5. Use ⊳
to select "Cancel" or "OK. Press OK to confirm the selected command and go back
to the previous menu.
Note: You can press the MENU button anytime during setting to cancel the selection and go back to
the previous menu.
Erase All
1. Press PLAY button to enter thumbnail screen
2. Press MENU button to enter Menu mode
3. Use ⊳
to move to Erase All
4. Press OK to enter
Battery Status
Full Power Level
66% Power Level
33% Power Level
Empty
SD/MMC card Status
Present and Valid
Present but Locked
Set Clock
The clock time is lost in last power off
11
Advertisement
