Declaration Of Conformity - Enterasys X-Pedition XSR-1805 Getting Started Manual

Application of Council Directive(s): 89/336/EEC
European Representative Address: Enterasys Networks, Ltd.
Conformance to Directive(s)/Product Standards: EC Directive 89/336/EEC
Enterasys Networks, Inc. declares that the equipment packaged with this notice conforms to the above directives.
WARNING: Do not install phone line connections during an electrical storm.
WARNING: Do not connect phone line until the interface has been configured through local management. The service
provider may shut off service if an un‐configured interface is connected to the phone lines.
WARNING: The NIM‐BRI‐ST cannot be connected directly to outside lines. An approved channel service unit (CSU) must be
used for connection to the ISDN network. In some areas this CSU is supplied by the network provider and in others it must be
supplied by the user. Contact your service provider for details.
Federal Information Processing Standard (FIPS) Certification
The XSR has been submitted to the National Institute of Standards and Technology (NIST) for FIPS 140‐2 certification and is
now officially listed on the NIST pre‐validation list. For more information about the FIPS validation program, go to http://
csrc.nist.gov/cryptval/preval.htm. For the FIPS 140‐1 and 140‐2 Pre‐Validation List, click on the [PDF] link at the top of the page.
vi

Declaration of Conformity

Manufacturer's Name: Enterasys Networks, Inc.
Manufacturer's Address: 50 Minuteman Road
Equipment Type/Environment: Networking Equipment, for use in a Commercial
Australian Telecom
73/23/EEC
Andover, MA 01810
USA
Nexus House, Newbury Business Park
London Road, Newbury
Berkshire RG14 2PZ, England
EN 55022
EN 55024
EC Directive 73/23/EEC
EN 60950
EN 60825
or Light Industrial Environment.
N826