Enterasys X-Pedition XSR-1805 Getting Started Manual page 39

Figure 2-16
4. Cable the FastEthernet port(s) to your LAN drop or a Hub, as shown in
Figure 2-17
5. Attach the power supply cord to the power connector at the rear of the XSR, as shown in
Figure 2-18, and plug in the country-appropriate power cord to a wall socket.
You are now ready to configure the software and initialize the XSR. Continue with
Configuration" on page 3-1.
Connecting T1 Drop & Insert Connector
Cabling FastEthernet (LAN) Connection
Figure 2-18 Attaching Power Cord
DEFAULT
CORD SWITCH
POWER
ADD
SN
NET.
Figure
ETH1 ETH2
XSR Getting Started Guide 2-11
Connecting Cables
2-17.
"Software