Resistance Range - Lutron Electronics LCR-9063 User Manual

C. Resistance
Range
Resolution Open
200 ohm
0.1 ohm
2 k
1 ohm
20 k
10 ohm
200 k
100 ohm
2000 k
1 k
20 M
10 k
Remark :
a. Though the internal test frequency is approx. 250 Hz.
However the accuracy adjustment are executed as :
* For the capacitance ( 2 uF, 200 nF, 20 nF, 2 nF ) range,
the acuracy adjustment is compared with the " Standard
capacitor that tested under the 1 KHz frequency ".
* For the capacitance ( 20 uF, 200 uF ) range, the
accuracy adjustment is compared with the " Standard
capacitor that tested on the 100 Hz frequency ".
* For the inductance ( 2 mH, 20 mH, 200 mH, 2 H ) range,
the accuracy adjustment is compared the " Standard
inductor that tested on the 1 KHz ".
* For the inductance ( 20 H ) range, the calibration is
compared the " Standard inductor that tested on the
100 Hz ".
b. The above spec. accuracy are tested under the
environment RF Field Strength less than 3 V/M & frequency
less than the 30 MHz only.
Accuracy
Circuit
Voltage
Approx.
600 mV ( 2 % + 3 d )
Approx.
300 mV
3