EOS 38.AS Installation And Operating Manual
Sauna heater
Hide thumbs
Also See for 38.AS:
- Installation and operation manual (22 pages) ,
- Installation and operating manual (22 pages)
Subscribe to Our Youtube Channel
Related Manuals for EOS 38.AS
Summary of Contents for EOS 38.AS
- Page 1 Installation and Operating Guide 38.AS MADE IN GERMANY IP x4 Druck Nr. 29342172en / - 44.06...
-
Page 2: General Instructions
Dear customer: General instructions Please note that optimum sauna climate conditions You have purchased a high-quality sauna heater can be achieved only if the cabin ventilation that will give you years of sauna bathing pleasure. (fresh air and exhaust) system, the sauna heater This sauna heating unit has been designed in and the control unit are designed and set to work conformity with the latest European safety... - Page 3 l Caution: Due to the high temperatures Special Instructions generated during operation of the sauna Improper installation can create fire hazards! heating unit, direct contact with the unit Please read the installation guide carefully and can cause burns. completely. Strict attention should be paid to l The sauna heating unit is not designed for dimensional data and to the following special installation/use in a niche, beneath the reclining...
-
Page 4: Minimum Distances
Minimum diameters in mm2 (copper lead) for connection to 380- 400 V AC 3N Suitable for cabin Power input in size Power line from Heater connection cable in m3 Fuses (in A) power grid from control unit to heater to control unit ca. -
Page 5: Sensor Installation
5. Secure the sauna heating unit to the wall Please remember that the sensor lines are thin, mounting bracket by inserting a sheet metal flexible tubes that must not be squeezed or screw through the hole positioned at the rear subjected to pressure. -
Page 6: Sauna Stones
Commissioning/Initial operation Sauna stones Sauna stones are natural materials. Check your Heater operation is initiated with the timer unit. You sauna stones at regular intervals, since they are may select a heating period of up to 4 hours. The susceptible to the effects of strong steam- timer runs for the selected time period and then water additives and may decompose over a long automatically... - Page 7 Safety cutoff Instructions Leakage current For the installation of sauna heaters, please pay The sauna heater is equipped with a temperature attention to the DIN VDE 0100 part 703 ! limiter for security. In case of a malfunction this temperature limiter This standard makes the following statement valid cuts off all 3 phases by safety reasons.
- Page 8 Circuit diagrams for sauna heaters 400 V AC 3N 400 V AC 3N 400 V AC 3N U V W N U V W N U V W N 400 V AC 3N Sample wiring diagram for a sauna system Circuit diagram for 7.5 kW heaters (with 7 kW 3 heating coil units of 2000 W each) U V W N...
- Page 9 Equipment start-up date: Stamp and signature of the authorized electrician: Service Adress: EOS-Werke Günther GmbH Adolf-Weiß-Str. 43 35759 Driedorf-Germany tel: +49 (0) 27 75 82-240 fax: +49 (0) 27 75 82-455 servicecenter@eos-werke.de...
Need help?
Do you have a question about the 38.AS and is the answer not in the manual?
Questions and answers