Tenda PW201A User Manual page 35

PW201A Wireless N Powerline AP User Guide
11g mode: Select it if you have only Wireless-G clients in your wireless
network.
11b/g mixed mode: Select it if you have only Wireless-B and
Wireless-G clients in your wireless network.
11b/g/n mixed mode: Select it if you have Wireless-B, Wireless-G and
Wireless-N clients concurrently present in your wireless network.
SSID: A SSID (Service Set Identifier) is the unique name of a wireless
network. This field is configurable.
SSID Broadcast: Select "Enable"/"Disable" to make your wireless
network visible/ invisible to any wireless clients within coverage when
they perform a scan to see what's available. By default, it is enabled.
When disabled, this SSID becomes invisible to any wireless clients
within the coverage. Manually enter the SSID if you want to connect to
it.
Channel: For an optimal wireless performance, you may select the
least interferential channel. It is advisable that you select an unused
channel or "Auto" to let device detect and select the best possible
channel for your wireless network to operate on from the drop-down
list.
Channel Bandwidth: Select a proper channel bandwidth to enhance
wireless performance. When there are 11b/g and 11n wireless clients,
please select the 802.11n mode of 20/40M, when there are only
non-11n wireless clients, select 20M frequency band mode; when the
wireless network mode is 11n mode, please select 20/40 frequency
band to boost its throughput.
35