Tenda PW201A User Manual page 51

PW201A Wireless N Powerline AP User Guide
MAC Address: Displays the MAC address entered when you add the
PLC device.
Device Password: Displays the Device Password entered when you
add the PLC device.
Authentication Status: Displays whether authentication has passed. To
pass authentication, below requirements must be met: a). You must
provide a correct MAC address and a correct Device Password for the
intended PLC device; b). The intended PLC device must be currently
connected with the Device. Otherwise, authentication fails. As seen in
above screenshot, the first PLC device passed authentication because
both its MAC address and Device Password entered are correct, and it
is currently on the Powerline network. While the second PLC device
failed because its Device Password entered is wrong. However, the
first PLC device will not be able to pass authentication if you disconnect
it from the current Powerline network (say, disconnect it from power
supply or change its network name).
Click "Delete" to delete a corresponding entry.
Note:
51