The Device provides 128-bit AES encryption method. This section
presents how to use the Pair hardware button to quickly create a secure
Powerline network.
2 or more Tenda Powerline devices under a single electricity meter will
interconnect to create an unencrypted public network automatically using
the same network name of HomePlugAV.
To create an encrypted private connection between 2 Tenda Powerline
devices, do as follows (Here we use a Tenda P200 and a Tenda PW201A
for demonstration):
1. Press the Pair button on P200 for 2-3 seconds and then release it.
The Power LED on P200 starts blinking, which indicates the P200 is ready
for pair auto-negotiation.
2. Within 2 minutes upon releasing the P200's Pair button, press the
Pair button on PW201A for 1-3 seconds and then release it. The PLC LED
PW201A Wireless N Powerline AP User Guide
Chapter 9 Pair Button
67