Event Log - D-Link DKVM-IP8 User Manual

6.6.8 Event Log

Important events like a login failure or a firmware update are logged to a selection of
logging destinations (see Figure 6-34). Each of those events belongs to an event
group, which can be activated separately.
The common way to log events is to use the internal log list of the DKVM-IP8. To show
the log list, click on "Event Log" on the "Maintenance" page. In the Event Log Settings
you can choose how many log entries are shown on each page. Furthermore, you can
clear the log file here.
List logging enabled
The common way to log events is to use the internal log list of the DKVM-IP8 . To
show the log list, click on "Event Log" on the "Maintenance" page.
Since the DKVM-IP8's system memory is used to save all the information, the
maximum number of possible log list entries is restricted to 1.000 events. Every
entry that exceeds this limit overrides the oldest one, automatically.
If the reset button on the HTML frontend is used to restart the DKVM-IP8,
all logging information is saved permanently and is available after the
Figure 6-34. Event Log
Warning
89 / 104
DKVM-IP8 User Manual