Keyboard/Mouse - D-Link DKVM-IP8 User Manual

6.5.2 Keyboard/Mouse

Host Interface
Enables a certain interface the mouse is connected to. You can choose between
"Auto" for automatic detection, "USB" for an USB mouse, and "PS/2" for a PS/2
mouse.
To use the USB and/or PS/2 interface you need a correct cabling between
the managed host and the managing device. If the managed host has no
USB keyboard support in the BIOS and you have connected the USB cable
only then you will have no remote keyboard access during the boot
process of the host. If USB and PS/2 are both connected and you selected
"Auto" as host interface, then the card will select "USB" if available or
otherwise falls back to "PS/2".
To get USB remote keyboard access during the boot process of the host, the
following conditions must be fulfilled:
Figure 6-22. Keyboard and Mouse Settings
71 / 104
Warning
DKVM-IP8 User Manual