Time Settings; Osd Mouse - D-Link DKVM-IP8 User Manual

Note: If your keyboard does not support the selected hotkey, you can press the
right button of mouse and press the Esc key simultaneously to bring up the OSD
window.

3.4.10 Time Settings

You can configure the scan interval for auto-scan function.
T I M E
S C A N
1 0 S E
When the Auto-Scan function is activated, the KVM Switch will auto-scan the host ports one
by one according to the interval setting. Note that the port does not connect to a
computer/server will be skipped when scanning. The interval range is from 5 to 99 seconds.
Default interval is 10 seconds.
Press Enter key to start editing. You can press Esc key to cancel the editing without any
change or press Enter key to save the modification.

3.4.11 OSD Mouse

You can change the moving speed of mouse cursor in this sub-menu. There are three
levels of mouse cursor speed. The fastest moving speed is FAST, the second is MIDDLE
and the slowest is SLOW.
Using "" and "" key on keyboard to move highlight bar to the wished speed and the press
Enter key to confirm your selection.
O S D M O U S E
S E L E C T
F A S T
M I D D L
S L O W
S E T T
T I M E
C
A P O
E
I N H S
:
I N T E R
27 / 104
DKVM-IP8 User Manual
S P E E D :