Table of Contents
Advertisement
A
S
ETTING
This chapter explains how to set up the 5760 VC and connect accessories.
A.1
Before Setting Up
Before setting up the 5760 VC, make sure you have the necessary components (see
"Package Checklist" on page 1-3). If anything is damaged or missing, contact your
local Mitel Networks distributor.
CAUTION Before connecting accessories, turn off the power and
A.2
Setting Up the Basic Components
Carefully unpack the Main Unit, and position it on a stable horizontal area.
Single and Dual TV Monitor Configurations
Mitel Networks supplies two types of cables to connect between the Main Unit and
the VIDEO-IN connectors on the TV monitor. See the illustration on the next page.
É
To connect a single TV monitor
1.
Connect the S-Video (CAB72008) or the Composite cable (CAB72009),
depending on your TV monitor. If your monitor offers both types of
connections, use the S-Video type for higher quality.
2.
Connect the red and white audio cables that are joined in the same harness
as the video cable.
É
To connect dual TV monitors
1.
Connect the Composite cable (CAB72008) between the Main Unit and the
TV monitor that will show the local video.
2.
Connect the S-Video cable (CAB72009) between the Main Unit and the
TV monitor that will show the remote video and the GUI.
3.
Connect the audio cables between the Main Unit and the TV monitor that
will show the remote video.
4.
When the 5760 VC runs, access the Video properties. Select Dual Monitor
(see "Monitor Configurations" on page 5-3).
Mitel Networks 5760 VC User's Guide
U
T
5760 VC
P
HE
disconnect the system and the accessory (if applicable) from
their power supplies.
A-1
Advertisement
Table of Contents
