DAELIM B-Bone Service Manual page 151

CYLINDER CYLINDER CYLINDER CYLINDER CYLINDER VALVE VALVE VALVE VALVE VALVE
CYLINDER CYLINDER CYLINDER CYLINDER VALVE VALVE VALVE VALVE
CYLINDER CYLINDER CYLINDER CYLINDER CYLINDER CYLINDER VALVE VALVE VALVE VALVE VALVE VALVE
CYLINDER CYLINDER CYLINDER CYLINDER CYLINDER CYLINDER CYLINDER VALVE VALVE VALVE VALVE VALVE VALVE VALVE
STEM SEAL STEM SEAL STEM SEAL STEM SEAL STEM SEAL
STEM SEAL STEM SEAL STEM SEAL STEM SEAL
STEM SEAL STEM SEAL STEM SEAL STEM SEAL STEM SEAL STEM SEAL
STEM SEAL STEM SEAL STEM SEAL STEM SEAL STEM SEAL STEM SEAL STEM SEAL
VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR
VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR VALVE SPRING COMPRESSOR
SPRING SPRING SPRING SPRING SPRING SPRING SPRING
SPRING SPRING SPRING SPRING SPRING SPRING
SPRING SPRING SPRING SPRING
SPRING SPRING SPRING SPRING SPRING
RETAINER RETAINER RETAINER RETAINER RETAINER RETAINER RETAINER
RETAINER RETAINER RETAINER RETAINER RETAINER RETAINER
RETAINER RETAINER RETAINER RETAINER
RETAINER RETAINER RETAINER RETAINER RETAINER
COTTER COTTER COTTER
COTTER COTTER COTTER COTTER COTTER COTTER
COTTER COTTER COTTER COTTER COTTER COTTER
COTTER COTTER COTTER COTTER
COTTER COTTER COTTER
NARROW PITCH
CYLINDER HEAD / VALVES
● After cutting the valve seat, apply lapping compound to
the valve face, and insert the valve with a valve guide
reamer.
△
NOTE
!
●
Do not excessively press and turn the valve to set it as it
may cause damage. Gently strike and set the valve.
●
The seat surface may become worn on one side if the
valve is set in the same position. Turn the valve slightly
when setting it.
●
Take precautions not to allow compound to get into the
clearance between the stem and guide while the valve is
being set.
IN/EX VALVE ASSEMBLY
● Install the valve spring and new stem seals.
● Lubricate each valve stem with molybdenum disulfide
grease and insert the valve into the valve guide.
● Check the valve moves up and down smoothly.
● For valve spring with varying pitch, install the valve
springs with the narrow pitch end facing down.
● Install the spring retainers.
● Compress the valve springs with the valve spring
compressor and install the valve cotters.
△
CAUTION
!
●
Compressing the valve spring more than necessary
when installing the valve cotters may cause loss of
valve spring tension.
TOOL : VALVE SPRING COMPRESSOR
10-11