Headlight; Front Winker; Bulb Replacement - DAELIM B-Bone Service Manual

B-bone scooter
Hide thumbs Also See for B-Bone:
Table of Contents

Advertisement

LIGHTS/SWITCHES/HORN
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
HEAD LIGHT
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
WASHER SCREW
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT SOCKET
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
HEAD LIGHT BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
WINKER BULB
19-2
HEADLIGHT BULB
REMOVAL
● Loosen the washer screw securing the headlight.
● Disconnect the headlight wiring.
● Install in the reverse order of removal.

BULB REPLACEMENT

● Pull off the headlight socket.
● Replace with a new bulb.
● Install in the reverse order of removal.
!
●When replacing the bulb, be sure not to put
●Note the following when replacing the bulb.

FRONT WINKER

BULBS REPLACEMENT
● Press the lock on the side of the winker base.
● Remove the winker lens.
● Remove the bulb from the socket and replace with a
!
●Pay attention not to damage the lens.
●Do not apply excessive force when removing
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
FRONT WINKER
● Install in the reverse order of removal.
NOTE
finger and contaminated gloves prints on the
headlight bulb, as they may create hot spots on
the bulb and cause is to fail.
- Do not replace while the headlight is ON.
after it is turned OFF, be sure to let it cool
down before servicing.
- Wear clean gloves while replacing the bulb.
Do not put finger prints on the headlight bulb.
- If you touch the bulb with your bare hands,
clean it with a cloth moistened with alcohol
and clean it with a clean cloth again.
- Be sure to install the rubber cover after
replacing the bulb.
new bulb.
NOTE
the lens.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B-bone sn125

Table of Contents