DAELIM B-Bone Service Manual page 122

LH.CRANK CASE COVER/CONTINUOUSLY VARIABLE TRANSMISSION
WEIGHT ROLLER
MOVABLE DRIVE FACE
RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE
RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE
RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE
RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE RAMP PLATE
OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL OIL SEAL
OIL SEAL OIL SEAL OIL SEAL
MOVABLE DRIVE FACE MOVABLE DRIVE FACE MOVABLE DRIVE FACE
MOVABLE DRIVE FACE MOVABLE DRIVE FACE
MOVABLE DRIVE FACE MOVABLE DRIVE FACE MOVABLE DRIVE FACE MOVABLE DRIVE FACE
MOVABLE DRIVE FACE MOVABLE DRIVE FACE
MOVABLE DRIVE FACE MOVABLE DRIVE FACE MOVABLE DRIVE FACE MOVABLE DRIVE FACE
8-6
BOSS
GREASE GREASE GREASE GREASE GREASE GREASE GREASE
GREASE GREASE GREASE GREASE GREASE GREASE
GREASE GREASE GREASE GREASE
GREASE GREASE GREASE GREASE GREASE
WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER
WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER
WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER
WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER WEIGHT ROLLER
MOVABLE DRIVE FACE MOVABLE DRIVE FACE
MOVABLE DRIVE FACE MOVABLE DRIVE FACE
MOVABLE DRIVE FACE MOVABLE DRIVE FACE
MOVABLE DRIVE FACE
MOVABLE DRIVE FACE INSPECTION
● Check the rollers for wear or damage.
● Measure the O.D. of each roller.
SERVICE LIMIT : 19.5mm
● Measure the abnormal wear.
SERVICE LIMIT : LESS THAN 2.0mm
● Check the drive face boss for wear or damage and
replace as necessary.
● Measure the O.D. of the drive face boss. Replace the
boss if the service limit is exceeded.
SERVICE LIMIT : LESS THAN 23.960mm
● Measure the I.D. of the drive face . Replace it if the
service limit is exceeded.
● Movable drive face inner diameter.
SERVICE LIMIT : LESS THAN 24.05mm
MOVABLE DRIVE FACE INSTALLATION
● Install the weight roller on the movable drive face.
● Apply the inside of the movable drive face with the
specified amount of grease.
SPECIFIED GREASE : ALVANIA EP2
GREASE APPLICATION : 0.5~1.5 g
● Install the movable drive face boss.
NOTE
!
Do not get the grease on the drive face. Remove
any misplaced grease with a degreasing agent.
Use only the specified grease in the specified amount.
● Install the movable drive face boss and movable drive
face to the LH. crank shaft.