Important Safety Instructions - Lightspeed TOPCAT Installation Manual

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use the apparatus near
water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance
with the manufacturer's
instructions.
8. Do not install near any heat
sources such as radiators,
heat registers, stoves, or
other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety
purpose of the polarized
or grounding-type plug.
A polarized plug has two
blades with one wider than
the other. A grounding- type
plug has two blades and a
third grounding prong. The
wide blade or the third prong
is provided for your safety. If
the provided plug does not
fit into your outlet, consult an
electrician for replacement of
the obsolete outlet.
10. Protect the power cord
from being walked on or
pinched particularly at plugs,
convenience receptacles, and
the point where they exit from
the apparatus.
11. Only use attachments/
accessories specified by the
manufacturer.
12. Use only with a cart, stand,
tripod, bracket or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use
caution when moving the cart/
apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during
lightning storms or when
unused for long periods of
time.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has
been spilled or objects have
fallen into the apparatus, the
apparatus has been exposed
to rain or moisture, does not
operate normally, or has been
dropped.
15. When the mains plug or
appliance coupler is used as
the disconnect device, it shall
remain readily accessible.
16. Please keep the unit in a good
ventilation environment.
IMPORTANT SAFETY INSTRUCTIONS
CONT'D
To avoid potential equipment damage and/or serious injury, READ AND
FOLLOW all safety precautions when installing the TOPCAT. WARNINGS are
included throughout the procedural steps in this guide, and are repeated below
for emphasis.
CAUTION
• USE A LICENSED ELECTRICIAN FOR POWER CONNECTIONS. The
TOPCAT system uses standard 100 – 240VAC power. Obtain the services of
a licensed electrician when supplying and connecting power to the ceiling
enclosure. BE SURE electrical installation complies with local building
codes. Improperly installing and/or connecting power to the system may
result in EQUIPMENT DAMAGE, serious INJURY and/or DEATH.
• DO NOT INSTALL ALONE. The ceiling enclosure weighs approximately 20
lbs (9 kg), and requires at least two people to install. DO NOT install alone.
USE SUITABLE LADDERS. use proper ladders or support platforms when
•
installing the TOPCAT enclosure. DO NOT stand on chairs, tables, or other
unsuitable surfaces.
• SUPPORT THE CEILING ENCLOSURE PROPERLY. DO NOT allow the
full weight of the ceiling enclosure to rest on the tile grid of the ceiling.
The ceiling enclosure is designed to be suspended at TWO POINTS by
suspension wires (secured to rafters or other suitable mounting points) and
to rest LIGHTLY on the tile grid.