Setting The Energy Saver Modes - Toshiba e-STUDIO400P Management Manual

2.SETTING ITEMS (ADMIN)

Setting the energy saver modes

The following energy saver modes are available in this menu.
Weekly timer
Using the built-in weekly timer, you can have the equipment automatically turned ON and OFF at specified times. For
instance, you can set the timer for the starting time and closing time of your office so that the copier will automatically
turn itself ON and OFF at those specified times.
You can turn on the power by simply pressing the [START] button on the control panel when the device is in the
sleep mode by the weekly timer.
When the power switch is turned off, the weekly timer does not work.
Auto power save mode
This function allows the equipment to automatically go into the energy saving mode if it is left inactive for a certain
period of time.
Sleep mode
This function puts the equipment into the sleep mode (unnecessary electricity is cut off at standby) if it is left inactive
for a certain period of time.
The sleep mode is applied to the e-STUDIO6530C Series and e-STUDIO4520C Series.
Sleep mode/Super Sleep mode
This function puts the equipment into the sleep or super sleep mode if it is left inactive for a certain period of time. In
the sleep or super sleep mode, power to the unused sections of this equipment is shut off while this equipment is in the
standby status. Power consumption in the standby status becomes smallest in the super sleep mode. In the standby
status, power consumption in the sleep mode is larger than that in the super sleep mode but is smaller than that in the
auto power save mode.
The sleep mode/super sleep mode is applied to the e-STUDIO455 Series and e-STUDIO855 Series.
For the types of energy saver modes and procedures for entering each mode, refer to the Quick Start Guide.
Neither [AUTO POWER SAVE] nor [SLEEP MODE] ( or [SLEEP/SUPER SLEEP]) is available for the European
version.
1
Press [GENERAL] in the ADMIN menu.
The GENERAL menu is displayed.
To display the ADMIN menu, see the following page:
P.69 "Entering Admin Menu"
2 SETTING ITEMS (ADMIN)
Setting General Functions 79