Recovery Setting From Super Sleep Mode; Changing Toner Mode Default Setting (E-Studio5008Lp Series) - Toshiba E-STUDIO2000AC Operator's Manual

1.USING THE AirPrint FUNCTION
 Recovery setting from Super Sleep mode
You can wake up this equipment from the Super Sleep mode when you start printing with the AirPrint.
Choose the [Administration] tab - [Setup] menu - [General settings] submenu - [Energy Save] - [Wake Up Setting], and
select the [AirPrint Discovery for IPv4] and [AirPrint Discovery for IPv6] check boxes.
The [AirPrint Discovery for IPv4] and [AirPrint Discovery for IPv6] check boxes have been selected by default.
 Settings for using AirPrint when the user authentication is enabled
Navigate to the [Administration] tab > [Setup] > [Print Service] > [IPP Print], and then select [Enable] for [Enable SSL]
and [Basic] for [Authentication].
If "Windows Domain Authentication" or "LDAP Authentication" is used for authentication type, enter the user name
and domain name in the following format: "user name@domain name".
 Changing Toner Mode Default Setting (e-STUDIO5008LP Series)
In the e-STUDIO5008LP Series, you can set either the erasable blue toner or black toner for AirPrint printing.
Select [Erasable Blue] or [Black] from the [Administration] tab > [Erasable Blue Print] menu > [Mobile]. [Black] is set by
default.
28 Setting up AirPrint in TopAccess