Troubleshooting; Basic Troubleshooting - Kodak ESP 5250 Start Here Manual

Esp 5200 series all-in-one printers
Hide thumbs Also See for ESP 5250:
Table of Contents

Advertisement

Troubleshooting
Basic troubleshooting
Some problems can be resolved quickly by power cycling the printer: Turn off your
printer. Wait five seconds. Turn on the printer.
Use the following information to help troubleshoot problems with your printer.
For more troubleshooting information, go to:
• www.kodak.com/go/itg to use our Step-by-Step Solutions and Repair tool for
help with problems such as paper jams and image quality.
• www.kodak.com/go/esp5250support for FAQs and links to other support for
your printer.
• www.kodak.com/go/inkjetnetworking for help with wireless networking.
• www.kodak.com/go/esp5250downloads to download the latest software and
firmware files.
• www.kodak.com/go/esp5250specs for the recommended system requirements.
Problem
PossiblE!;,Solutions
i "
l2
Printer does not power on
Printer not detected
Wireless connectivity
problems
Printhead carriage jam
• Make sure you are using the power cord that came with your printer.
• Make sure the power cord is connected to the AC adapter and is plugged
into an outlet or power strip.
• If the USB 2.0 cable was disconnected from the printer, then reconnected, or
if power to the printer was interrupted, restart the computer.
• Make sure your printer is plugged in and turned on.
• If you are using a USB cable, make sure:
- you have a USB 2.0 cable.
- that the USB cable is connected to both your printer and your computer.
• If you are using a wireless connection, make sure the:
- printer is connected to your wireless network (check the Wi-Fi
connectivity LED and the SSID).
- your access point is transmitting data.
- firewall (excluding WINDOWS Firewall) is allowing the services needed
for your printer.
For additional information, go to www.kodak.com/go/inkjetnetworking.
For wireless connectivity issues, go to www.kodak.com/go/inkjetnetworking.
• Open the printer access door and clear any obstructions.
• Check that the printhead and ink cartridges are installed correctly.
(The printhead and ink cartridges are installed correctly when you hear
them click into place,)
www.kodak.com/go/a iosu pport

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents