Infoprint 1332/1352/1372
Duplex chassis grounding is provided from the printer to the duplex option through a ground spring
attached to the frame and base of the printer. The ground connection is automatically made when the
option is installed below the printer.
The paper input sensor is located in the rear of the duplex option under the input paper guide. The
paper exit sensor is located on the left frame assembly.
Option microcode
The options are "Smart Options" or options that have a system board. The option system board has
a microprocessor that controls the option mechanism. A software architecture is provided that
controls the option and communicates information such as paper path status, sensor status, motor
status, and so on to the base printer.
Paper feed jams
260 Paper Jam
250 Paper Jam
23x Paper Jam
24x Paper Jam
3-22
Service Manual
201 Paper Jam
200 Paper Jam
27x Paper Jam
(28x Paper Jam
occurs in the
finisher option only)
202 Paper Jam
23x Paper Jam