Printer Setup; Setting The Page Count; Viewing The Permanent Page Count; Maintenance Page Count - Lexmark Infoprint 1332 User Manual

Printer setup

Setting the page count

This lets the servicer change the page count from the Diagnostics Menu. This is used whenever the
system board is replaced because this board contains the printer NVRAM Memory where the page
count is stored.
To set the page count:
1.
Select Page Count from the Diagnostic menu.
•
The current page count displays.
•
The leftmost digit blinks, indicating it is the first digit to be changed.
2.
Press Menu until the value you want displays.
3.
Press Select to move to the next digit, and press Menu until the value you want displays.
Continue with each digit until you set the page count. You can skip any digit by pressing Select.
4.
Press Select to save the new page count in NVRAM.
5.
Press Return/Stop to exit the Diagnostic menu.

Viewing the permanent page count

The permanent page count can only be viewed and cannot be changed.
To view the permanent page count:
1.
Select Permanent Page Count from the menu.
2.
Press Return/Stop to exit the Diagnostic menu.

Maintenance page count

This counter is reset by the servicer after a 80 Scheduled Maintenance message displays
(300K copies) and a maintenance kit is installed.
To view the maintenance page count:
1.
Select Maintenance Count Value from the Configuration menu.
2.
Press Return to go to the previous menu.
To reset the maintenance page count to zero:
1.
Select Reset Maintenance Count Configuration menu.
2.
Pressing Select resets the maintenance page counter to zero.
Reset Maintenance Count Saved displays momentarily. When the reset operation is complete,
the menu returns to the Printer Setup Reset Maintenance Count screen.
Infoprint 1332/1352/1372
3-17
Diagnostic aids