Maintenance; Maintenance Schedule - Husqvarna Rider ProFlex 21 AWD Operator's Manual

Maintenance

Maintenance Schedule

The following is a list of maintenance procedures that
must be performed on the Rider. For points marked with
footnote numbers 4 or 5, turn to an authorised service
representative.
G = Described in this manual.
❍= Not described in this manual.
Maintenance
Check for fuel and oil leaks
Check the parking brake
Check the engine's oil level (every
refuelling)
Check the fuel pump's air filter
Check the safety switch, seat
Check the safety switch, lifting lever
Check the safety switch, pedal system
Check/clean the engine's cooling air
intake
Check the cutting unit:
• attaching the blades
• condition of the blades (sharpness,
shape, etc.)
Check the steering cables (any play,
etc.)
Check fastenings (screws, nuts, etc.)
Start the engine and blades, listen for
unusual sounds
Clean under the cutting unit
Clean the transmission's cooling air
intake
Inspecting the muffler
Check the battery's acid level
Check the transmission oil level
Check the condition of belts, belt
pulleys, etc.
Check for damage
MAINTENANCE
Page Daily
main-
tenance
before after
❍
-
G
37
G
65
G
40
G
43
G
43
G
43
G
33
G
48
G
50
G
50
G
34
❍
-
G
23
G
49
G
34
35
41
70
-
-
At Maintenance
3
Weekly
least interval in hours
main-
once
tenance
25
a year
G
G
G
G
G
G
❍
❍
50 100 300
29
English-