Cutting The Engine - Husqvarna Rider ProFlex 21 AWD Operator's Manual

Cutting the Engine

If the engine has been worked hard, it is preferable to
let the engine idle for a minute so it is running at its
normal working temperature when it is stopped. Avoid
idling the engine for long periods, as there is a risk of
carbon build-up on the spark plugs.
1. Lift the cutting unit with the hydraulic lifting lever.
The unit can then be secured in the raised position
if necessary by moving the mechanical lifting lever
backwards to the lock position.
If the cutting unit is left in the lower position,
the start lock circuit will prevent engine starts.
2. Move the throttle control to the "MIN" position.
Turn the ignition key to "STOP".
3. When the Rider is at a standstill apply the parking
brake by holding down the pedal and at the same
time press in the lock button.
DRIVING
8009-536
8009-535
8009-544
8009-328
27
English-