USER’S MANUAL IMPORTANT SAFETY INSTRUCTIONS 1) Read the 2) Keep these instruct 3) Heed l l a 4) Follow all instructions. 5) Do not use this apparatus nea 6) Clean only with dry c t o l 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 18
**CAMERA SETUP** **CAMERA SE > WDR CONTROL MEDIUM WDR CONTROL EXPOSURE . . > EXPOSURE . . WHITE BALANCE ATW . . WHITE BALANCE FLUORESCENT FLUORESCENT D / N CONTROL AUTO . . D / N CONTROL SHARPNESS . . SHARPNESS .
Page 19
FLUORESCENT AUTO . . D / N CONTROL AUTO . . D / N CONTROL SHARPNESS . . SHARPNESS . . SATURATION . . SATURATION . . SPECIAL . . SPECIAL . . NS . . MENU EXIT OPTIONS . . MENU EXIT OPTIONS .
MERA SETUP** **CAMERA SETUP** **CAMERA SETUP** MEDIUM WDR CONTROL MEDIUM WDR CONTROL MEDIUM WDR C > EXPOSURE . . EXPOSURE . . EXPOS ATW . . WHITE BALANCE ATW . . > WHITE BALANCE ATW . . WHITE FLUORESCENT FLUORESCENT >...
Page 22
CAMERA SETUP** **CAMERA SETUP** MEDIUM WDR CONTROL MEDIUM EXPOSURE . . ATW . . WHITE BALANCE ATW . . > FLUORESCENT AUTO . . D / N CONTROL AUTO . . SHARPNESS . . SATURATION . . SPECIAL . . PTIONS .
Page 23
ATW . . DAY/NIGHT EXTERNAL SETUP WHITE BALANCE ATW . . DAY/NIGHT AUTO SETUP > WHITE BALANCE FLUORESCENT FLUORESCENT > METER DELAY AUTO . . > D/N THRESHOLD . . D / N CONTROL AUTO . . D / N CONTROL D/N LIMIT SHARPNESS .
Page 24
PREV . SAVE . CANCEL . EXPOSURE . . EXPOSURE . . ATW . . > WHITE BALANCE ATW . . WHITE BALANCE FLUORESCENT > FLUORESCENT AUTO . . D / N CONTROL AUTO . . D / N CONTROL SHARPNESS .
CANCEL . 2800 5.5K ADJUST R/B ADJUST ADVANCED BLC SE 5.5K 8100 *** WARNING *** > RED All User properties will > PERCENTILE CANCEL . 2900 BLUE be written to Flash SPECIAL PNESS CANCEL . PREV . SAVE . CANCEL . PREV .
Page 26
CANCEL . R/B ADJUST ADVANCED BLC SETUP > RED > PERCENTILE **CAMERA SETUP** BLUE **CAMERA SETUP** RATION LINE LOCK MENU EXIT OPTIO > WDR CONTROL MEDIUM PREV . SAVE . CANCEL . WDR CONTROL MEDIU PREV . SAVE . CANCEL . >...
Page 27
If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact Clinton Electronics Technical Support at 1-800-549-6393 or 815-633-1444. Problem Solution Nothing appears on • Check the power connection. the screen. • Check the video signal line connection. • Check the Brightness of Auto Iris lens. The video image is not clear. • Check if the lens is clean. Clean the lens with a clean cloth or brush. • Adjust the contrast feature of the monitor. • Make sure that the screen is not exposed directly to a bright light. Move the camera if necessary. The screen is dark. • Adjust the contrast feature of the monitor. • If you have an intermediate device, set the 75Ω/Hi-z properly, and check the terminals. •...
Page 28
Camera CE-VX70B Image Sensor 1/3 Inch PIXIM C-MOS SEAWOLF Sensor Resolution 690 HTVL Equivalent Effective Pixels 758 (H) x 540 (V) Sync System Internal / Line Lock Selectable Minimum Illumination 0.1 Lux Shutter Speed 1/25 ~ 1/30, 720 sec. (f/1.2) Dynamic Range 120dB (Max.), 102dB (Typical) AGC Control Programmable up to 50dB Lens 2.8 ~ 10.5mm (F1.2) True Day/Night Video Output 1.0 Vp-p 75Ω Power Consumption Max. 240mA (AC24V), Max. 360mA (DC12V) Power Requirement DC12V / AC24V Operating Temperature -20°F ~ 122°F Dimensions 5.74” (Dia.) x 4.13” (H)
Need help?
Do you have a question about the VandalX VX70B and is the answer not in the manual?
Questions and answers