SA-BT100P / SA-BT100PC
Caution: Keep the Panel earth spring in safe place. Avoid
denting it. Place it back during assembling.
10.8. Disassembly of SD P.C.B.
• • • • Follow (Step 1) to (Step 3) of Item 10.3.
Step 1 Remove 1 screw at SD earth spring.
Step 2 Remove 2 screws on SD P.C.B.
Step 3 Remove SD P.C.B.
10.9. Disassembly of Lid
• • • • Follow (Step 1) to (Step 3) of Item 10.3.
• • • • Follow (Step 1) to (Step 7) of Item 10.5.
• • • • Follow (Step 1) to (Step 4) of Item 10.7.
Step 1 Remove 1 screw from the Lid angle.
Step 2 Remove the Lid angle.
Step 3 Remove the shaft holder.
Caution Note: Keep the Lid angle and shaft holder in safe
place. Avoid denting it. Place it back during assembling.
Step 4 Move the shaft (R) of the Lid in the direction of arrow (1)
Step 5 Remove the lid (Right Side) in the direction of arrow (2).
Step 6 Lift the door spring in the direction of arrow (3).
Step 7 Move the shaft (L) of the Lid in the direction of arrow (4).
Step 8 Move the shaft (L) of the Lid in the direction of arrow (5).
Step 9 Remove the DVD lid in the direction of arrow (9).
46