Special Mode Setting - Panasonic SA-BT100P Service Manual

SA-BT100P / SA-BT100PC
9.2.

Special Mode Setting

9.2.1. Service Mode Table 1
Mode name
Initialize Mode
Rating password
Service Mode
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
Forced disc eject
Forced power-off
Aging
Item
Description
*All the main unit's parameters are initialized.
The audiovisual level setting password is ini-
tialized to Level 8.
Setting every kind of modes for servicing.
*Details are described in 9.3.1. Service Mode
at a glance.
cleaned.
Screen display: [The player's history data has
been cleared] is displayed for five seconds.
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
When the power button is not effective while
power is ON, turn off the power forcibly.
Perform sequence of modes as * Aging
Description shown below continually.
FL display
INITIALIZE
INIT INIT
SERV
****** ******
Same display as before execution.
The display before execution
leaves.
******
Display in P-off mode.
Display following the mode.
30
Key operation
Front Key
Press [STOP], [SKIP FWD] and
[OPEN/CLOSE] keys simulta-
neously for five seconds when
power is off.
Open the tray, and press [SKIP
REV] and [PLAY] simultaneously for
5 seconds.
When the power is off, press [SKIP
FWD], [OPEN/CLOSE] and
[PLAY] keys simult aneously for 5
seconds.
When disc is not in tray. press
[STOP] and [POWER] keys simulta-
neously for 5 seconds.
When the power is off, press [SKIP
REV ] and [PLAY] keys simulta -
eously for 5 seconds or more.
Press [POWER] key over than 10
seconds.
When the power is ON, press
[STOP], [POWER] and [OPEN/
CLOSE] simultaneously for over 5
seconds and less than 10 seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit s parameters
include tuner are initialized by TEST
mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 10 seconds.
n