Panasonic SA-BT100P Service Manual page 36

SA-BT100P / SA-BT100PC
9.3.5. Service Mode Table 5
Mode name
CEC (H) output
CEC (L) output
Tray OPEN/CLOSE Test The DVD drive tray is opened and closed
Delete the Laser Used
Time
Delete the Last Drive
Error
Delete the Error History
Error code initialization
Initialize Service
Finishing service mode
Item
Description
Check of the CEC terminal high output of
HDMI.
Check of the CEC terminal low output of
HDMI.
repeatedly.
Laser used time stored in the memory of the
unit is deleted.
Delete the Last Drive Error information stored
on the DVD Drive.
Delete Error History information stored on the
unit.
Initialization of the last error code held by
timer (Write in F00)
Last Drive Error, Error history and Error
Codes stored on the unit are initialized to fac-
tory setting.
Release Service Mode.
FL display
CECHOK
CECHNG
CECLOK
CECLNG
* is number of open/close cycle
times.
CLR
CLR
CLR
CLR
CLR
Display in STOP (SS) mode.
36
Key operation
(Remote controller key)
Press [5] [5] in service mode.
Press [5] [6] in service mode.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remote
Controller more than 10 seconds.
Press [9] [5] in service mode.
Press [9] [6] in service mode.
Press [9] [7] in service mode.
Press [9] [8] in service mode.
Press [9] [9] in service mode.
Press power button on the front
panel or Remote controller in ser-
vice mode.