Disassembly Of Stand - Panasonic SA-BT100P Service Manual

Special Note: During reassembling procedures, ensure the
P.C.B. is seated properly at the locators.

10.24. Disassembly of Stand

• • • • Follow (Step 1) to (Step 3) of Item 10.3.
• • • • Follow (Step 1) to (Step 6) of Item 10.4.
• • • • Follow (Step 1) to (Step 7) of Item 10.5.
• • • • Follow (Step 1) to (Step 9) of Item 10.6.
• • • • Follow (Step 1) to (Step 5) of Item 10.11.
• • • • Follow (Step 1) to (Step 14) of Item 10.12.
• • • • Follow (Step 1) to (Step 8) of Item 10.13.
• • • • Follow (Step 1) to (Step 6) of Item 10.15.
• • • • Follow (Step 1) to (Step 6) of Item 10.21.
• • • • Follow (Step 1) to (Step 4) of Item 10.22.
• • • • Follow (Step 1) to (Step 7) of Item 10.23.
Step 1 Remove 4 screws at the Bottom Chassis.
Step 2 Remove the Stand unit.
59
SA-BT100P / SA-BT100PC