To Modify A Control Setting; To Recall A Preset - Orban OPTIMOD 6300 Operating Manual

OPTIMOD 6300 DIGITAL
 If an Enter Passcode dialog box appears, enter a valid passcode and the 6300
PC Remote software will initiate a connection to the 6300 unit.
A window will appear saying, "Connecting to the 6300, please wait." A few mo-
ments later, a new message will appear: "Loading system files, please wait."
When run, the Orban PC Remote software installer makes copies of all 6300 fac-
tory preset files on your local hard drive. The PC Remote software reads these
files to speed up its initialization. If any of these files have been deleted or dam-
aged, the PC Remote software will refresh them by downloading them from the
6300. If the PC Remote software needs to do this, it can substantially increase the
time required for the software to initialize, particularly through a slow modem
connection.
When this download is finished, the main meters will appear.
 A wheel mouse is the quickest and easiest interface to use—you will rarely (if
ever) have to use the keyboard.
 The help box at the bottom of the screen always presents a short help mes-
sage for the function you have selected.

To modify a control setting:

A) Choose P
ROCESSING
the-left button on the button bar.
B) Select menu tabs for L
Modify controls. All other menu tabs contain Full or Advanced Modify con-
trols.
You can reset any Basic Modify Control without losing L
tionality; Full and Advanced modify control adjustments will cause L
M
ORE
To set a control, click it (it will become highlighted) and then adjust it by
dragging it with the mouse or moving the wheel on the mouse.
You can also use the + and – keys on the numeric keypad to adjust any
control.

To recall a preset:

A) Choose R
ECALL
dialog box. You can also click the leftmost button on the button bar.
B) Click the desired preset within the dialog box to select it.
C) Double-click the desired preset or select it and click the R
to make it active.
Continually clicking the R
current and previous active presets.
D) Click DONE to dismiss the O
P
ARAMETERS
-M
ESS ORE
to be grayed-out.
from the F
P
RESET
ECALL
P
PEN
from the E menu or click the second-to-
DIT
, S E , and EQ to access Basic
TEREO NHANCER
menu to bring up the O
ILE
P button will toggle between the
RESET
dialog box.
F
RESET ILE
OPERATION
func-
-M
ESS ORE
-
ESS
P F
PEN RESET ILE
P button
ECALL RESET
3-59