Table of Contents
Advertisement
over-discharge.
3.
When storing your battery, keep it in a cool, dry place under room temperature.
Charging the Battery
Use only the charger specified by the manufacturer. The charger's LED indicates the
charging progress.
Status
Standby (no-load)
Battery is charging
Battery is fully charged
Error
Please follow these steps:
1. Plug the power cord into the adapter.
2. Plug the AC connector of the adapter into the AC outlet socket.
3. Plug the DC connector of the adapter into the DC socket on the back of the charger.
4. Place the radio with the battery attached, or the battery alone, in the charger.
5. Make sure the battery is in well contact with the charging terminals. The charging
Charger LED
Red LED flashes slowly (0.2s
on/3s off )
Red LED solidly glows
Green LED solidly glows
Red LED flashes rapidly (0.2s
on/0.2s off)
10
Hide quick links:
Advertisement
Table of Contents
